Aristel SLT70 Manuel d'utilisateur

Aristel Networks PROGRAMMING MANUAL FOR THE DV SERIES KEY SYSTEMS DV38/38-66/96/108 MODELS

Revised by R. Robinson Issue DV2.3 21 November 2006 9 Zone 100 Pause Time Default value = 020 Range = (000 ~ 255) x 40 mSec. The pause time i

Revised by R. Robinson Issue DV2.3 21 November 2006 10 Zone 107 Hold Recall Time Default value = 090 Range = (000 ~ 255) Sec. This sets the t

Revised by R. Robinson Issue DV2.3 21 November 2006 11 Zone 113 Trf Busy Rc Timeout Default value = 030 Range = (000 ~ 255) Sec. If a call is

Revised by R. Robinson Issue DV2.3 21 November 2006 12 Zone 120 AT-RED Wait Time Default value = 010 Range = (000 ~ 255) Sec. If the auto-red

Revised by R. Robinson Issue DV2.3 21 November 2006 13 Zone 126 Busy Tn Off1 Time Default value = 025 Range = (000 ~ 255) *20 mSec. Zone 125

Revised by R. Robinson Issue DV2.3 21 November 2006 14 Zone 133 Disa Wait C. Default value = 015 Range = (000 ~ 180) *1 Sec. If a DISA call i

Revised by R. Robinson Issue DV2.3 21 November 2006 15 Zone 139 ACD Tm Default value = 015 Range = (000 ~ 255) *1 Sec. This timer sets the an

Revised by R. Robinson Issue DV2.3 21 November 2006 16 Zone 200 PABX Out Default value = 9 Range = (0 ~ 9) This Zone assigns the digit nece

Revised by R. Robinson Issue DV2.3 21 November 2006 17 Zone 208 ICM DT SIGN Default value = 0 Range = (0:S ~ 1:I) This Zone allocates either

Revised by R. Robinson Issue DV2.3 21 November 2006 18 DIGIT DIALLED EXTENSION TO RING 2 Group 02 Item 01 2 Group 02 Item 02 2 Group 02 Item

Revised by R. Robinson Issue DV2.3 21 November 2006 1 DDVV PPrrooggrraammmmiinngg MMaannuuaall ffoorr DDVV3388,, 3388--6666,, 9966 aann

Revised by R. Robinson Issue DV2.3 21 November 2006 19 Example Zone 213 = 06 Zone 504 / Ext 12 / Item 08= 3 Ext 12 (SLT) lifts off and hears car

Revised by R. Robinson Issue DV2.3 21 November 2006 20 Range = (0:D ~ 1:E) Note! Either the value in Zone 129 must be 000, or this zone must b

Revised by R. Robinson Issue DV2.3 21 November 2006 21 • If there is/are extension(s) in Zone 400 group 04, the call will be transferred to thos

Revised by R. Robinson Issue DV2.3 21 November 2006 22 This Zone determines the warning method used by the system when call limiting is applied i

Revised by R. Robinson Issue DV2.3 21 November 2006 23 This Zone sets the range of speed dial numbers that will be exempt from restrictions for o

Revised by R. Robinson Issue DV2.3 21 November 2006 24 Note! Zone 119 must be a value greater than 015 if Zone 229 = 4 or 5 Related Zones. Z122,

Revised by R. Robinson Issue DV2.3 21 November 2006 25 Related Zones. Z100 Zone 233 Busy Tn Tms Default value = 06 Range = (00 ~ 99) This

Revised by R. Robinson Issue DV2.3 21 November 2006 26 Z235=3 Only 1st port prog. + SLT ring = intercom cadence Z235=4 Any ext can prog. + SLT

Revised by R. Robinson Issue DV2.3 21 November 2006 27 If there is no password set in Zone 301 Set 03 (----dddd) then if the caller dials the dig

Revised by R. Robinson Issue DV2.3 21 November 2006 28 02 YES 8 SEC Z602 group 01 OR group 02 NO DISABLE 03 NO 8 SEC Z602 group 01 OR group

DV Series System Programming.Revised by R. Robinson Issue DV2.3 21 November 2006 2 Introduction: There are six different programming zone grou

Revised by R. Robinson Issue DV2.3 21 November 2006 29 Zone 244 Door SensorR Default value = 0 Range = (0:N ~ 2:D) This Zone sets the ringi

Revised by R. Robinson Issue DV2.3 21 November 2006 30 2 = Incoming ringing signal 3 = Silent with LED flash Related Zones. Z124, Z131, Z244,

Revised by R. Robinson Issue DV2.3 21 November 2006 31 5. If the extension is Func, 2, 6 to an external number, the call will go to that number

Revised by R. Robinson Issue DV2.3 21 November 2006 32 Zone 407 Code 21=08 listed 08 prefix calls (see Z614 CO 01 for timing interval) Zone

Revised by R. Robinson Issue DV2.3 21 November 2006 33 BLANK ITEMS WHERE DATA IS NOT USED AND SEPARATORS BETWEEN DATA ENTRY POINTS. WARNING! IF

Revised by R. Robinson Issue DV2.3 21 November 2006 34 08 DO NOT USE 09~12 DO NOT USE When programming Speed Dial codes (zone 404, codes 100~199

Revised by R. Robinson Issue DV2.3 21 November 2006 35 Range = (0:D ~ 1:E) This allows an SLT to use Carrier Easy Call features requiring a

Revised by R. Robinson Issue DV2.3 21 November 2006 36 Z 404 / 151 = 0011 and CO = 03 Z404 170 = 0011 and positions 23~30 = 21480000 OPERATION I

Revised by R. Robinson Issue DV2.3 21 November 2006 37 FAC = 9543 Zone 503, Extension 11, Item 05/6 = 22 If a FAC is used to initiate a call from

Revised by R. Robinson Issue DV2.3 21 November 2006 38 The system then looks at the last 2 digits dialed (45) and consults the lookup table (Zone

Revised by R. Robinson Issue DV2.3 21 November 2006 3 Step 3. Press [SAVE] key during Help List for direct access to the system’s programming

Revised by R. Robinson Issue DV2.3 21 November 2006 39 Zone 300 System Reset Default value = 0 Range = (1 ~ 3) This Zone allows the program

Revised by R. Robinson Issue DV2.3 21 November 2006 40 Zone 302 Relay Fun (Item = relay number) Default value = 02 00 Range = Relay

Revised by R. Robinson Issue DV2.3 21 November 2006 41 Zone 304 D/M/Y W T Default value = current system date and time Range = N/A NOTE: Some

Revised by R. Robinson Issue DV2.3 21 November 2006 42 Example of SMDR printout and symbol legend CO Ext S Telephone # Account MM/DD

Revised by R. Robinson Issue DV2.3 21 November 2006 43 Zone 400 Consl (Group = 1 of 8 max) Default value = 11 12 13 14 for each group Range

Revised by R. Robinson Issue DV2.3 21 November 2006 44 Zone 402 VSU An (Group = Voice Channel number) Default value = 01 02 03 04 05 06 0

Revised by R. Robinson Issue DV2.3 21 November 2006 45 Zone 257 = 9 The above also applies Zone 257 = 1~8 The FAC operates as before, with the e

Revised by R. Robinson Issue DV2.3 21 November 2006 46 A = PRESS 2 B = PRESS 2,2 C = PRESS 2,2,2 D = PRESS 3 E = PRESS 3,3 F = PRESS 3,3,3 G

Revised by R. Robinson Issue DV2.3 21 November 2006 47 If left in the default state, all CO lines will have the same toll level in any particular

Revised by R. Robinson Issue DV2.3 21 November 2006 48 Zone 408 Area-A (Code = 1 of 30 Codes) Default value = _ _ _ Range = 3 digits per co

Revised by R. Robinson Issue DV2.3 21 November 2006 4 DSS Button Layouts DKP5x series DSS 1 R/G BACKWARDS DSS 6 R HELP DSS 11 R SAVE DSS 16 R/

Revised by R. Robinson Issue DV2.3 21 November 2006 49 Zone 411 Offi-B (Code = 1 of 30) Default value = ddd Range = 3 digits per code This

Revised by R. Robinson Issue DV2.3 21 November 2006 50 Zone 500 Key GP (Group = 1 of 8 groups.) Default value = as per charts below Range =

Revised by R. Robinson Issue DV2.3 21 November 2006 51 FUNCTION NUMBERS FOR DSS KEY ALLOCATION 000 Non-Operational 034 Paging Zone 3 068 Chec

Revised by R. Robinson Issue DV2.3 21 November 2006 52 Item 02:KP Equipment What type of equipment is installed as the extension. This allocates

Revised by R. Robinson Issue DV2.3 21 November 2006 53 Zone 503 Station Gp (Ext: = Extension number) Default value = See individual Items for d

Revised by R. Robinson Issue DV2.3 21 November 2006 54 Item 02:Monitor Monitoring of other stations who are busy on a call. Allocates the “abil

Revised by R. Robinson Issue DV2.3 21 November 2006 55 DID calls to master extension Both extensions are free Both extensions will ring to th

Revised by R. Robinson Issue DV2.3 21 November 2006 56 Item 04:Manual Direct link to Operator. Allows or disallows the following function. By l

Revised by R. Robinson Issue DV2.3 21 November 2006 57 Item 04:Volume UP Rising ringing for stations on incoming calls. Allows or disallows the

Revised by R. Robinson Issue DV2.3 21 November 2006 58 Item 03:FAC Code Forced Account Code allocation to the Station. This allocates which FAC

Revised by R. Robinson Issue DV2.3 21 November 2006 5 DEFINITIONS USED IN MANUAL Notes Notations are in green Warnings Warnings and recomme

Revised by R. Robinson Issue DV2.3 21 November 2006 59 Zone 600 FLX (CO = Line #) DAYTIME Default value = 11 12 13 14 15 Range = N

Revised by R. Robinson Issue DV2.3 21 November 2006 60 This zone can be used to assign a name to the CO line instead of the line number. The dire

Revised by R. Robinson Issue DV2.3 21 November 2006 61 If the caller dials the CO access number (Zone 202), an outside line can be seized and an

Revised by R. Robinson Issue DV2.3 21 November 2006 62 Hunt: This is similar to linear with a major difference. If an assigned station is free bu

Revised by R. Robinson Issue DV2.3 21 November 2006 63 Zone 610/Set 01= 01 Zone 611/Set 01= 00 Zone 607/Group 01= 11 12 Zone 610/Set 02= 02 Zone

Revised by R. Robinson Issue DV2.3 21 November 2006 64 Zone 610 DID N (SET = indial pair number) Default value = 00 NOTE: DV38 has 80 DID sets

Revised by R. Robinson Issue DV2.3 21 November 2006 65 Zone 611 DID S (SET = indial pair number) Default value = 00 Range = station numbers

Revised by R. Robinson Issue DV2.3 21 November 2006 6 Table of Contents Entering System Programming. 2 On Call Programming 2 Programming Help L

Revised by R. Robinson Issue DV2.3 21 November 2006 7 Zone 203 Toll Code 16 Zone 204 12/24 Clock 16 Zone 205 Ext Number LEN. 16 Zone 206 Loca

Revised by R. Robinson Issue DV2.3 21 November 2006 8 Zone 304 D/M/Y W T 41 TZone 305 Alarm Set = which time setting (01~10) 41 Zone 306 Day